The HT5 is the easiest to program touch screen thermostat in the world!  There are only 4 things you need to set.  The time, the maximum temperature, program start time, and program finish time.  All other settings are automatic and cannot be changed.

​

Unlike manual thermostats, the HT5 can be used on floor probe or air sensor, and used in manual or programmed mode.

The HT5 can be used as a new install or as a replacement for an existing thermostat.

​

The HT5 comes in three parts. The thermostat, the mounting block, and the electrical block. The thermostat attached to the electrical block via an electrical ribbon.  The electrical block acts like a circuit breaker for an electrical surge. The electrical block is the part likely to be affected by an electrical surge and can be replaced without having to buy another thermostat.

​​​

​

All Heatwell thermostats come with a 2-year warranty.  All thermostats are tested in NZ, and come pre-set. ​​