HT5 Vertical White Underfloor Heating Thermostat
The HT5 has been designed to be extremely easy to program. The HT5 is the easiest touch screen thermostat available in the NZ market.
There are only four settings! Set the time, the desired temperature, the start and finish times for the programmed option. Once set, you can use the thermosat on manual or programmed mode.
The HT5 comes in three parts. The thermostat, the mounting block, and the electrical block.
The electrical block is designed to be installed independently and does not need to be re-attached to the mounting block. The electrician will love how easy the TH5 is to install.
The thermostat is attached to the electrical block via an electrical ribbon. The electrical block acts like a circuit breaker for an electrical surge. The electrical block is the part likely to be affected by an electrical surge and can be replaced without having to buy another thermostat.
Parts are available.
HT5 Thermostat | Heatwell
HT5 Data Sheet
Modes: Manual / Program
Settings: (F) Floor probe / (A) Air Sensor
Possible schedules: 7 days only
Programmable: 1 per day
Time: 12-hour clock only
Lock: Yes
Standby battery: Yes
Touch screen: Yes
Programming videos and programming notes available
Diamensions: 12cm x 8cm x 1.8cm
Weight: 0.3kg
Volts - electrical block: 230-240 VAC
Volts – thermostat: 5V
Max Capacity: 16 Amps
Maximum temp: 40 degrees Celsius
Minimum temp: 5 degrees Celsius
Frost Protection: 3 degrees Celsius
Floor probe options: 3 kohms / 10 (default) / 15 / 25 / 50 / 100